Conceptual Polymer

Here are some picture-filled procedures that were created to make various performance modifications easy to accomplish. Check back periodically for more.

Halltech Stinger-R intake installation procedure for 2001-2004 C5s
This intake system represents one of the best bang-for-the-buck power increases you'll find anywhere. It includes a huge air filter, larger-than-stock airbridge, and smooth ThrottleBody coupler. Coupled with an aftermarket cat-back exhaust, this system can boost Rear Wheel Horsepower by 12-15.

Cold air modification for Halltech Stinger and Blackwing-equipped C5s
Supply a steady stream of cold outside air to your air filter without changing the looks of your front-end. This modification involves cutting the lower radiator cover, covering the opening with stainless steel wire mesh, and adding an unbreakable (polycarbonate) intake scoop to keep maximum HP up and power-robbing heat losses down. All necessary part numbers are included. Total cost: Less than $40.00.

Breathless Performance Products (BPP) Shifter Install for 97-04 C5s
This highly adjustable short-throw shifter has 16 different configurations and can increase your shifting speed dramatically. This photo-packed procedure takes you from start to finish in less than two hours.

Cleaning and oiling a Halltech Stinger Warhead air filter
This is an absolute must-read for Stinger or Blackwing owners who are not familiar with maintaining reusable air filters.

Optional Mounting Bracket for the Watts Filter with Extended Body
The manufacturer-supplied mounting bracket for the Watts F504-02DHX67 particulate filter assembly is adequate for many mounting positions, but this aftermarket version provides even more options. Check out pics. and contact information inside.

PCV Line Oil Removal 102
What does your PCV valve do and why is it important to trap blowby oil and dirt before it gets back into your engine? This report not only answers these questions, but it also highlights the various types of catch cans, their positive and negative attributes, and some valuable insight as to how you can find a less expensive, yet very efficient alternative.

How to install a CP catch can in a C5 Corvette (NEW)

PCV valve replacement (LS1 engine)

Removing and Installing an EBCM (C5 Corvette)

How to stop brake fluid reservoir leakage (NEW) - the $1.00 solution

Please note that although these procedures have been tested and found to be very effective, Conceptual Polymer assumes no liability for any problems as a direct or indirect result of the modifications presented. In other words, proceed at your own risk.