Click on a thumbnail image to see a larger product view. Note that all products are made completely or assembled right here in the USA! See page 2 ^ for spare components.
What are air/oil separators? See our comprehensive white paper that explains EVERYTHING, here.
Simple and highly effective design with
clamping options (hand squeeze clamp shown with low-profile,
easier to use screw clamp as
option) or free-standing design
Please click
here for
more photos.
1.
High torque worm geared 12V DC reduction motor with 8mm shaft
2.
1-inch diameter aluminum motor shaft coupler with stainless
steel M4 setscrew
3.
Foam watch pad disc with center hole to mount on the shaft
coupler - protects watch back from damage Note:
Winder was extensively tested using strap and
metal band watches. Women's watches may require some trimming of
the foam support ring.
3b.
Elastomer adaptor ring (not shown) - under item 3 for aluminum motor adapter to prevent
slippage between the foam watch pad disc and the aluminum
adapter: This may be required for watches with metal bands but
may be used with any kinetic watch.
4.
Illuminated button (green) on/off switch - maintains
illumination while motor is powered on
5.
Three millimeter thick formed aluminum mounting bar with 2 mounting
holes for permanent mounting (as alternative to using the 2-inch hand
clamp or optional screw clamp)
6.
Two-inch capacity open jaw capacity clamp or
low-profile screwdown clamp
for quick desk/table attachment and removal or
free-standing with heavy solid stainless steel base
7.
12V DC power supply with quick disconnect couplers and 45 inch
long cable. Power supply can be plugged into wall outlet with
body facing up or down in wall outlet or extension cord
receptacle.
Note: This
upgraded motor features very low noise
levels that range from 42 to 45 decibels from 2 feet away.
Part number: CP09PA001
Price:
$109.00 (+ shipping cost) for the hand clamp version and $118.00
for the low profile screw clamp version
Designed, assembled, and tested
in USA
Low voltage/Power (Replaceable) 1.5 Watts/12V AC/DC LED
bulbs
3.8L x 3.1W x 2.16T
inches
Length does not include bottom-protruding LED socket and
wires
Red & Black wire length = 4.5 inches
Click here for available
colors, installation guide, and
comparison
to solar lighting
Part number: CP10PA0XX
Price:
$180.00/set of 4 translucent colored rocks, LED bulbs,
sockets, and 8 connectors) (+ shipping cost)
Attributes:
Highly water and UV resistant
polyurethane
Low profile and extremely durable
Will never fade
or crack
LED bulbs (T10) rated for 15,000 on or off cycles
(20.5 years with 2 actuations per 24 hour period)
Hand-cast in USA with
USA-sourced casting material
2-Stage Dual Density Filter Media
High Efficiency 16-oz reservour Glass Reservoir Air/Oil Separator with 3/8" hose fittings and 2-piece stainless steel clamp assembly with rubber liners and thumb screws.